Juliet Balustrade and Balcony

K-Vantage Juliet Balcony

The Juliet Balcony is designed to suite with Kawneer’s Open-In Window and Sliding Door products. It provides a simple, elegant and affordable glazed balcony with a virtually seamless external visual appearance and is ideally suited for domestic, residential, offices and commercial applications (subject to barrier loading conditions).

Discover more with our featured video content:
Document L (Q&A)

  • Suites with the AA® 720 Open-In Window, AA® 3572 Lift/Slide Door, and KWD92 UT+
  • Single or double leaf designs available
  • Can be designed as a French Casement or as an Open-In with tilt functionality
  • Conforms to BS 6180 Line Load and Point load and BS EN 13049 Impact Testing

Introduction
The Juliet Balcony is designed to suite with Kawneer’s Open-In Window and Sliding Door products. It provides a simple, elegant and affordable glazed balcony with a virtually seamless external visual appearance and is ideally suited for domestic, residential, offices and commercial applications (subject to barrier loading conditions).

The balcony is created as part of the ‘window package’ from an optimised number of engineered components, creating a value engineered solution and offering ease of fabrication and installation.

A choice of single or double leaf designs are available to suit specific building requirements and increase the aesthetics of the façade.

The Juliet Balcony is a turnkey solution that completely eliminates the need for additional sub-contractor work as it is totally self-contained and does not interface with any other element of the building structure.

Product Features and Benefits

  • Suites with the AA® 720 Open-In Window, AA® 3572 Lift/Slide Door, and KWD92 UT+
  • Accommodates single glazed panes from 10mm to 18mm thick
  • Single or double leaf designs available
  • Can be designed as a French Casement or as an Open-In with tilt functionality
  • Size Parameters – minimum width, single leaf is 650mm, maximum width, double leaf is 2 x 1000mm (for widths beyond this, please contact our Technical Services Department)
  • Height to the top edge of the glazing is 1100mm to 1500mm from finished floor level
  • Can be used in ‘punched openings’, for example, in masonry elevations or as part of curtain wall façades
  • A wide range of polyester powder paint finishes with up to 30 years guarantee and a range of anodised finishes with up to 25 years guarantee
  • Glazing systems and Juliet Balcony from one manufacturer, offering design flexibility and total project solutions

Note: Increased balcony widths up to 2500mm and increased Barrier Loading (1.5 kN/m Line Load) are possible, please contact our Technical Services Department for more information.

Application
The Juliet Balcony is best suited to low rise, residential applications.

It is the responsibility of the specialist subcontractor to ensure correct product selection for any given application in accordance with current legislation and guidance.

Performance
The Juliet Balcony has been fully tested in accordance with BS 6180 (Barrier Loading) to 0.74 kN/m Line Load and with BS EN 13049 (Impact Resistance) achieving Class 5.

The Juliet Balcony, installed and glazed to Kawneer recommended procedures, has been tested and certified in accordance with:

BS 6180 Line Load and Point Load
– Line Load: 0.74 kN/m
– Point Load: 0.50 kN
BS EN 13049 Impact Testing
– Impact Test: Class 5 (drop height 950mm)

Construction
The Juliet Balcony consists of a mitred and cleated glazing channel which is mechanically fixed to the AA®720 window frame. The glass panel is retained in the glazing channel using EPDM gaskets and the system is drained and ventilated.

Glazing
Single glazed panes from 10mm to 18mm thick can be accommodated.

Note: Please contact our Technical Services Department regarding the use of the Juliet Balcony for specific schemes so that the appropriate glass specification can be established, by the glass supplier, to ensure the performance of the balcony system.

K-Vantage Systems Brochure
2 MB
Kawneer’s BIM Models are downloadable in the Revit format and also available on request as IFC files.

Our BIM Models provide users with 3D images of the products as well as the critical COBIE data to provide guidance through the whole design and construction process.